How Much Do Aluminum Windows Cost in Saudi Arabia?

In Saudi Arabia aluminum windows are priced per square meter, and in 2026 the market still spans a wide band. A basic sliding window with single glazing typically runs SAR 250-400 per m² supplied and installed. A thermally broken frame with double glazing — the specification most new Riyadh villas should be comparing — commonly lands between SAR 500 and SAR 800 per m². Premium tilt-and-turn systems with low-E glass and imported hardware can exceed SAR 1,000 per m².

Applied to a villa with 40-60 m² of window area, that is the difference between roughly SAR 12,000-22,000 and SAR 28,000-48,000 — a real budget line, not a rounding error. The figure is never a single market rate; it is the sum of profile, glass, hardware, finish and installation. Two quotes for the same window size can differ by 60 percent and both be honest, because they describe different products.

The profile is the first cost lever. Alloy quality, wall thickness and the profile system all move the price: 1.2 mm is a common minimum for residential frames, while 1.4 mm or more is expected for large sashes and wind-exposed elevations. Surface finish matters too — polyester powder coating resists UV and dust far better than a thin anodized layer, and determines how the frame looks after five summers.

Glass is often the most expensive single component on a performance window. Specify an actual build-up, such as 6+12+6 low-E, rather than the phrase double glass. Hardware grade and mechanism type — multi-point locking, hinges and handles — separate a window that seals for a decade from one that rattles in two years. Installation, including survey, fixing, sealing and removal of old frames, is usually 15-25 percent of the total and should never be left out of the comparison.

A thermal break is a polyamide barrier inside the aluminium profile that separates the exterior and interior faces, interrupting the path heat travels through metal. In Riyadh, sun-facing frames on single-glazed windows can become too hot to touch in July and August. A thermal break keeps the room-side surface close to indoor air temperature, reduces winter condensation, and cuts the cooling load the air conditioner has to fight.

Thermal break windows also help with compliance. Saudi Building Code energy requirements (SBC 601) push new residential and commercial envelopes toward lower U-values, and a project using thermally broken, double-glazed windows documents its envelope performance far more easily. Expect the upgrade to add roughly SAR 200-350 per m² over a basic window, an amount usually recovered through reduced cooling demand within a few summers.

Double glazing windows in KSA commonly use 6+12+6 or 6+14+6 units — two 6 mm panes with a sealed air or argon-filled gap. Wider gaps insulate better up to the point where convection inside the cavity cancels the gain. A low-E coating on the inner face of the outer pane blocks solar heat while preserving daylight, which matters most on west and south elevations.

On noisy sites near highways, a laminated inner pane adds acoustic performance without changing the frame. The right build-up depends on orientation, room use and budget: a fixed north-facing window needs far less specification than a large operable window on a west wall. Ask for the glass build-up in writing, not just the colour.

The same window can cost more or less depending on who sells it. A reseller adds margin to a fabricator's price and often subcontracts installation, which splits responsibility when a unit leaks or sticks. Buying factory-direct from window suppliers in Riyadh keeps survey, fabrication, installation and warranty under one party, so there is one number to call if something goes wrong.

When evaluating a supplier, ask three questions. Which licensed profile system do you fabricate with? Can we visit the factory and see the production line and quality records? What is the warranty, and who honours it in five years? Extrusion quality, machining tolerance and sealing determine whether a window performs in the long run — not the brochure.

An accurate price starts with an accurate survey. Provide a floor plan or measured opening dimensions, note which elevations take the afternoon sun, and decide the glazing and frame colour before requesting quotes. Then ask for an itemised breakdown: price per square meter by opening type, glass build-up, hardware brand, delivery, installation, and removal of the old windows.

Be sceptical of instant prices — real windows are fabricated from dimensions surveyed on site, not from a phone call. For a typical villa order, expect one to three weeks of fabrication. A written scope listing exactly what the price per square meter includes is the best protection you can get, because it turns a vague number into a contract.

Ramz Al Badran manufactures aluminum windows at our factory in Riyadh — licensed thermal break profile systems, double glazing with low-E glass, polyester powder coating, and in-house installation crews. Because we fabricate what we install, every quote is itemised from real material and labour, and every window is surveyed, fabricated and checked before it reaches your site. That is why projects across Riyadh specify our aluminum windows for villas, offices and commercial buildings.

Send us your floor plan or opening dimensions and photos, or visit the factory to see profiles, glass samples and finishes in person. We will return a fixed, itemised price with a fabrication schedule — and the window you approve on paper is the one that is built, installed and sealed into your building.